Metal buildings are a popular choice for commercial, industrial, and even residential applications due to their strength, durability, and cost-effectiveness. However, one often-overlooked component of these structures is the gutter system, which is quite different from traditional gutters.
Metal Building Components – Gutters
When you look at metal building accessories or metal building components, you will see that gutters are one of the components on the list. Metal buildings typically feature sculpted eave gutters or sculptured gutters, which have a unique shape that integrates with the overall metal roof and wall design. While these gutters add to the aesthetic appeal of the building, they also present significant challenges when it comes to water drainage. Their unique design makes them far more prone to clogging and water backup than standard K-style or half-round gutters, increasing the risk of leaks, overflow, and structural damage. Without proper gutter protection, these sculpted gutters can become a major source of maintenance headaches and costly repairs. Click here to see information about metal building sculptured gutters
Metal Building Components – Gutter Clogging
One of the metal building components is the gutter and a problem can happen to that component. The biggest issue with sculptured eave gutters on metal buildings is their unconventional shape, which makes them more vulnerable to debris buildup and clogging. Unlike traditional gutters, where the outer edge is usually level or slightly lower than the back, metal building gutters are designed with an outer edge that is significantly higher than the back edge. This unusual design can cause serious water management problems.
When leaves, pine needles, and other debris accumulate inside the gutter, water flow is obstructed, leading to the rain gutter filling up with water and backups. Because the outer edge of the gutter is taller, the water has nowhere to go except backward—toward the building. This can cause leakage down the walls, potentially leading to interior water damage, mold growth, and even flooding on the floor inside the building. Businesses, warehouses, and homeowners who rely on metal structures must deal with these clogs, especially during heavy rainstorms when the water volume is too much for an obstructed or even partially obstructed gutter to handle.
To make matters worse, the difficulty of accessing and maintaining these gutters adds to the challenge. Although usually accessible from a ladder, sculptured eave gutters are often integrated into the roof system, making them more difficult to retrofit with standard gutter guards because they wont fit. An effective, long-term gutter guard solution is valuable for preventing water damage and reducing maintenance needs. Click to see an easy DIY solution to prevent gutter clogging in metal buildings.
Metal Building Components – Brush Gutter Guards
Brush gutter guards are a metal building component that solves a gutter problem. If you own or manage a metal building, GutterBrush is the ideal solution for keeping sculptured eave gutters free from clogging and back ups, and functioning properly. GutterBrush is a simple, flexible brush gutter guard that fits directly into your existing gutters without any tools, fasteners, or complicated installation. With six different diameter sizes available, GutterBrush can accommodate a wide range of metal building gutter shapes and sizes, ensuring a perfect fit that prevents clogs and water overflow. They have a very large 8 inch diameter flexible brush as well as 5 other sizes.
Unlike traditional metal gutter screens or covers, which can be difficult to install and may require custom modifications for metal building gutters due to the fact that the outer edge of the metal building gutter is strapped to the upper ribs of the roof obstructing installation of a gutter screen, GutterBrush is completely adaptable and flexible so it will fit and solve clogging in any gutter The cylindrical brush design allows water to flow freely while keeping leaves, pine needles, and debris from clogging. This means:
- No more clogged metal building gutters that lead to backup and water damage.
- No tools or professionals needed—installation is an easy DIY project.
- Significantly reduced maintenance, saving time and money.
- Protection against gutter backup interior leaks and rain water damage.
Since GutterBrush prevents clogs before they start, metal building owners can enjoy peace of mind knowing their gutters will function properly year-round. This is particularly important for commercial buildings where water damage can disrupt business operations, damage stored items, and lead to costly interior repairs as well as gutter repair attempts.
GutterBrush has been protecting metal building gutters for over 20 years, and with a life expectancy far exceeding the 10-year material warranty, it’s a long-term solution you can trust. Commercial building owners, Homeowners, business owners, and facility managers all appreciate the low-maintenance, cost-effective protection GutterBrush provides.
It is so easy, that anyone can install GutterBrush. Just slide 3 foot lengths into the gutter and fill the gutter and leave it in place for easy clog protection. While GutterBrush is a DIY-friendly product, keep in mind that installing it yourself requires ladder work, which comes with inherent risks. If you’re comfortable with ladders, then you should be comfortable handling the installation, click here for our brush gutter guard installation manual to guide you through the process. If you prefer to hire a professional, GutterBrush can be easily installed by any gutter or roofing contractor in just minutes. Click here for a great way to stabilize your ladder for added ladder safety.
By the way, you can call the guys over at GutterBrush if you have gutter questions of any type; use them as a helpful gutter resource. They are on the east coast so they are eastern standard time but they have years of gutter experience and they like helping people with gutter problems. You do not have to buy Gutterbrush in order to get help from these considerate folks. If you have metal building gutter questions call 888-397-9433 for their gutter hotline.
Metal Building Components – Unavailable Gutter Guards
It is amazing that it is very hard to find a leaf guard or a gutter guard that fits metal building gutters. When you search metal building gutter guards, you find that none of the metal building manufacturers seem to offer an easy gutter guard solution that fits these strange shaped metal building gutters. Perhaps the metal building industry feels somewhat responsible for the fact that in order to make a strong steel gutter that makes the building look good in appearance, they designed a gutter that is truly a poor design when you consider the importance of gutter leakage and keeping rain gutter water out of the building. The metal building industry created this lousy traditional gutter design and if I were them I would simply want to ignore the problem. Perhaps this is why it seems impossible to find a gutter guard that fits sculpted eave gutters and doesn't require a lot of labor and customization. Thank goodness the folks at Gutterbrush began solving this gutter component problem 20 years ago by solving gutter clogging in metal building gutters to avoid backups. It remains that when you search for metal building gutter components you can not seem to find a decent solution other than GutterBrush and their 6 diameter sizes that will fit and solve clogging in any or every gutter. Just fill the whole gutter to solve clogging.
Metal Building Manufacturers Call GutterBrush
Click here to see GutterBrush commercial gutter guard sizes
Metal building manufacturers really could not be bothered with gutter clogging, they would just pass that off as a maintenance issue that has nothing to do with the manufacturer. Metal building manufacturers refer GutterBrush to their customers so that they can help the metal building owner deal with the gutter backup problems associated with the placement of metal buildings closer and closer to trees these days. When you combine the fact that many are now starting to build metal buildings for the purpose of residences, often referred to as Barndominiums”, it is certainly understandable that GutterBrush has become the hero to both the Metal building manufacturer and the metal building gutter owner. Thanks to GutterBrush there is an effective and easy metal building accessory that is a gutter guard.
Protect Your Metal Building Gutters from Clogging
Don’t let sculptured eave gutters become a liability for your metal building. Prevent clogging, overflow, and costly water damage with GutterBrush—the simplest and most effective metal building components gutter guard solution on the market.
If you’re ready to safeguard your gutters with a reliable, long-lasting solution, contact GutterBrush today! Call us at 888-397-9433 or email us at info@gutterbrush.com.
Give the folks at GutterBrush a call—they are always standing by to help and will probably even give you a discount!
